Instruction Manual SMB-638 PORTABLE DVD PLAYER Please read before using this unit.
PLEASE READ THE INSTRUCTION CAREFULLY BEFORE OPERATING THIS UNIT. IF THIS PRODUCT IS SOLD WITH SWITCHING ADAPTOR AND IN-CAR ADAPTOR Switching Adaptor 1. Input : AC100-240V~ 0.5A 50-60Hz 2. Output: DC 9V ... 2000mA In-Car Adaptor 1. Input : DC ... 12V 2. Output : DC ... 12V 2A WARNING To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
Getting Started Before attempting to connect, operate or adjust this product, please read these instruction completely and keep this manual for future reference. Dear customers : We would like to take this opportunity to thank you for purchasing this DVD Player. We strongly recommend that you carefully study the operating instructions before operating the unit. Main Features • Front loading DVD / CD player.
Disc types Audio & Video Disc size 12cm single side, single layer / single side, double layer PAL & NTSC DVD disc Playback time 135min / 240min max. Disc size 12cm / 8cm CD disc Playback time 74min/20min max. Audio * Player is CD-R, CD-RW compatible. Note: CD-R, CD-RW Discs recorded with writing device can only be used when they are correctly treated. Region Management Information This DVD Player is designed and manufactured to respond to the Region Management Information that is recorded on a DVD disc.
Safety precautions Warning Attention To avoid electrical shock, do not open the cabinet, refer servicing to qualified personnel only. If smoke, unusal odors or unrelated noise are emitted from the unit, turn off the power and disconnect the AC power cord. Warning Attention Keep the unit away from flower vases, tubs, sinks, etc. If liquids are spilt into the unit, serious damage could occur. Touching the unit is dangerous especially if during a thunder storm.
Location of Control 1. Panel Release Knob 2. Remote Sensor 3. Power On / Line In Indicator a. Power On - Green light b. Line In - Orange light 4. Power On/Off Switch 5. LCD On/Off 6. Audio Button 7. Standby Button 8. Repeat A-B Button 9. Mute Button 10. Repeat Button 11. Sub-Title Button 12. Master Volume UP/DOWN Button 13. Push To Open Knob 14. Setup Button 15. Menu Button 16. Title Button 17. Display Button 18. Direction Buttons (Up / Down / Left / Right ) 19. Enter Button 20. Previous Button 21.
Battery installation (remote control unit) 1. Remove the battery cover. 2. Insert two batteries (AAA) making sure the polarity (+/-) matches the marks inside the unit. 3. Replace the cover. - Do not attempt to recharge, short-circuit, disassemble, heat or throw the batteries into a fire. - Do not mix old and new batteries. - Dispose of properly in accordance with local laws. Note : Weak batteries can leak and severely damage the remote control unit.
Operation TV Selection Turn on the TV, the DVD player and the Audio Amplifer System (if any). 1. Press the “TV/VIDEO” button on the TV. 2. Select the Video Mode (TV). Note: If there are more than 1 AV channel for the TV, select the channel you have connected to the DVD player. 3. Select the Correct Audio Input on the AV Amplifier (if any). Play Discs 1. Press the OPEN button ( ) on the front panel and load the Disc on the tray. The label side should be facing upwards.
Setup Menu Items : Press the SETUP button on the remote control. The following menu will be shown: 1. GENERAL SETUP TV DISPLAY • Normal/PS This is selected when the DVD player is connected to a normal TV. Wide-screen imaged are shown on the screen, but with some parts cut automatically. • Normal/LB This is selected when the player is connected to a normal TV. Wide screen images are shown on the screen, with black belt on the top and bottom.
SCREEN SAVER Start the screen saver, the screen saver image appears when the player stops or the image is frozen for a few minutes. This saver can keep the screen from being damaged. - ON (Start the screen saver) - OFF (Remove the screen saver) -- GENERAL SETUP PAGE -TV Display Angle Mark OSD Lang Captions Screen Saver ON OFF Screen Saver 2. AUDIO SETUP When AUDIO SETUP option is selected, the following menu will be shown.
3. VIDEO SETUP When VIDEO SETUP and Quality option is selected, the following menu will be shown. To select the desired item use the direction ( / / / ) button. • Brightness • Contrast • Colour • TFT MODE -- VIDEO SETUP PAGE -Brightness Contrast Colour TFT MODE 00 00 -- PREFERENCE SET UP PAGE -- 4.
DISC MENU If a language listed below is recorded on the disc, you can set the Menu to be displayed in such language. If not, the language recorded will be used. - English - French - German - Spanish -- PREFERENCE SET UP PAGE -TV System Audio Subtitle Disc Menu Parental Password Default English French German Spanish Preference Disc Menu Languages PARENTAL When playing disc with parental lock function, you may select an age control grade according to grade of disc and your own preference.
DVD Menu Play The DVD Menu Play function is only applicable for DVD movie. User can access the Casting informationm, Production History, Movie Introduction etc. directly through this function. 1. Press the DVD MENU button on the remote control to enter the Root Menu. 2. Use the Direction button ( ) or input the item index through the Number keys (0-9) to do the selection. 3. Press ENTER to confirm the selection. Audio This funciton is applicable for DVD and CD audio but with different effects.
Subtitle This function is only applicable for DVD disc. It can change the subtitle language shown on the screen. Note : Number of subtitle available depends on the DVD disc. Angle Some discs may have multiple viewing angles during production. The ANGLE button is to select the viewing angle shown on the screen. Note : The number of Angle of View depends on the disc. Search This function is applicable for DVD and CD audio.
Program Mode This function is applicable for DVD and CD audio. User can assign the playback sequence according to his/her preference. For CD audio, user can assign the track sequence while for DVD disc, user can assign both the Title and Chapter sequence. • CD 1. Press the PROGRAM button. The Program Sequence table will be shown on the screen. PROGRAM 01 02 03 04 05 __ __ __ __ __ 06 07 08 09 10 __ __ __ __ __ EXIT START NEXT 2.
2. Enter the title number according to the user preference through the Number keys (0-9). PROGRAM 01 02 03 04 05 TT: 01 CH: TT: CH: TT: CH: TT: CH: TT: CH: 06 07 08 09 10 TT: TT: TT: TT: TT: CH: CH: CH: CH: CH: EXIT START NEXT 3. Enter the chapter number of the title selected in the last step. PROGRAM 01 02 03 04 05 TT: 01 CH:01 TT: CH: TT: CH: TT: CH: TT: CH: 06 07 08 09 10 TT: TT: TT: TT: TT: CH: CH: CH: CH: CH: EXIT START NEXT 4. Repeat step 2~3 to input the sequence.
Cautionary Note When Moving the Player • Be sure to remove the disc from the player before packing for moving. It is recommended that you also remove the disc from the player and turn off the power when not using the player. Saving Power • It is recommended that you turn off the power to the DVD player when not in use. If you are not going to use it for prolonged period of time, unplug the power cord from the wall outlet.
Cautions on Charging Battery Pack • Charge within the surrounding temperture range of 10°C - 30°C. Charging at a low temperature slows down the charging time and decreases the life of the battery pack. You cannot fully charge the battery pack at high temperature. • If the DVD player is overheated and the battery pack’s internal temperature goes up to a certain level, you will not be able to charge the battery pack. (The lamp flashes quickly and the light does not come on.
TROUBLE SHOOTING Check the following guide for the possible cause of a problem before contacting service. Cause Symptom The unit is receiving • The AC adapter is disconnected from the wall outlet or is not no power connected to the unit. • The battery is depleted. • No disc is inserted. The power is ON, but the unit does not operate There is no picture • The “Line Select” switch is set to IN, but there is no external video (and/or sound), and input available (see page 6).
SPECIFICATION GENERAL Power source Power consumption External dimensions (LxWxH) Weight Operating conditions Operation status Operating humidity DC 7.4V-12V ... 2A 10W 305x195x48mm / 12x7.7x1.9in. Approx 1kg / 2.2 lbs (without battery) Temperature: 5°C to 35°C Horizontal 5% to 90% SYSTEM Laser Signal system S/N Dynamic Range Semiconductor laser wave length 650nm NTSC/PAL more than 90db more than 90db INPUT Composite video Audio 1.0V P-P 75ohm negative sync. 0.
www.bratz.com TM & © MGA Entertainment, Inc. All Right Reserved. Used under license by The Singing Machine Co., Inc. The Singing Machine Company, Inc. 6601 Lyons Road, Bldg. A7,Coconut Creek, FL33073-9902, USA. TEL:(954) 596-1000 FAX:(954) 596-2000 VISIT OUR WEBSITE www.singingmachine.
