User's Manual

1. When the unit is in "NIGHT MODE" , the night mode icon " " will flash 3
times, and then the display will go blank. When any button is pressed, the
display brightness will turn on to medium brightness for 7 seconds .
2. Press the "DIMMER" button on front under the LCD. Repeatedly to cycle
through the brightness levels of the LCD display and choose from: high,
medium, low and night mode. The default setting is medium.
AUTO DST:
1. Auto-DST by default will ship as "on".
2. To toggle auto-DST on/off, press both "time set" and "hour adjust" together.
3. The icons for DST will show in these cases:
(1) when the time is being set, show the icon for either "DST on" or "DST off".
(2) when the auto DST is turned on or off, flash either "DST on" or "DST off"
three times .
(3) when the clock is first turned on: display either "DST on" or "DST off" for
one minute only.
EASY DST:
1. This is simply the "hour adjust" button on the back next to time set.
2. User simply presses or press and hold to change the current hour only... the
hour does not need to flash, user doesn't have to press "set"... they just tap
"hour adjust" and the time will advance one hour.... it will cycle through 24
hours AM and PM
NIGHT MODE