Product Manual

DISCONNECT UNIT FROM pliers, remove the factory installed 1/8”

COMPRESSED AIR SUPPLY. restrictor, noting the orientation.

3. Using a medium sized pipe wrench,

loosen the union pipefitting that

attaches the control unit to the bottom

of the pressure vessel.

6. Replace restrictor. Reverse steps to

reconnect control unit to bottom of the

pressure vessel.

4. With your free hand placed under the

control unit (so as to not let it drop),

completely unscrew the union, allowing

the control unit to separate from the

pressure vessel (place a small container

under the pressure vessel to catch any

remaining soda).

5. Tip the control unit upside down, to

empty any soda that may still be in the

inlet fitting. With a pair of needle nose