Specifications

Number to the one same as you wrote on the paper page. Now, start to write! Through

this way, your new handwriting will be captured and stored in the right digital page.

Erasing a Digital Page on the Digital Pad

Erasing a digital page is similar to tearing off a paper page. By using the or

function button to move the Digital Page Number to the one which you want to erase.

Then press the Erase button

on the pad. The display will show

message. Press the Erase button

again to erase all contents stored in the digital

page.

Here is a brief recommendation: you may want to tear off the paper page or simply

cross out the page number you wrote on the paper page.

Note! When

message appears, the erase procedure will be cancelled if

you write or press any button

, or to execute other functions. All

contents remain intact in the digital page.

Note! Once a digital page is erased, its original contents can not be recovered.

Turning off the Digital Pad

Press the Power button to turn off the digital pad. The display will be blank.

If you have not written or pressed any function button within the previous 30 minutes,

the digital pad sounds a beep and automatically shuts down. The display will be blank.

Note! Since the pad has the automatic shutdown capability, please make sure that

the display is on if you want to write again after a long period of time.

As you turn on the digital pad, the display will show the last Digital Page Number at the

time it was turned off.

Setting the Date and Time

The dates created and modified for the digital page file are recorded according to the

clock in the digital pad.

1. Turn off the digital pad.

2. Press and hold the

button on the digital pad. Then press the Power button until

the year digits flash on the display.

3. Repeatedly press or hold down the

or button to set the year.

4. Press the

button. Then the month digits flash.

5. Repeat Step 3 and 4 to set the month, day, hour, minute, second and year

cyclically.

Note! Only 24-hour format is available.

6. Press the

button during the setting. The date and time adjustment will be stored.

Then the digital pad will be turned on and the current time appears on the display.

Note! If you turn off the digital pad during the setting, the date and time

adjustment will be not stored. The clock automatically returns to the

previous setting.