Specifications

Low Battery Indication on the Digital Pad
When the batteries remain too low power and are in need of replacement, the
Low Battery icon will appear on the display. Please replace the batteries in
the pad.
When the batteries are exhausted, the pad sounds 3 beeps. Then the pad is turned off
immediately.
Notes on Replacement of Batteries in the Pad
When you replace the batteries in the pad, if the batteries are not in the battery
compartment over about one minute, the adjusted date and time will be erased. Please
reset the date and time.
Notes on use of the SD Memory Card
z Before you remove the SD memory card from the pad, please turn off the pad first.
Or some data in the last digital page file may be lost.
z When a SD memory card with the write-protect switch set to LOCK is inserted into
insertion slot, the pad sounds 2 beeps and the Storage Device icon
flashes
on the display. If you use the digital inking pen to write on the pad, the pad will
beep. You can not use the digital pad under this situation. Please remove the SD
memory card with the write-protect switch set to LOCK.
Full Memory Indication
The 90% icon will appear to indicate that 90% capacity of the current
storage device ( or ) is used.
The Full icon will be shown if the memory is full in the current storage
device ( or ). If that is the case, the digital pad can not store your
new handwriting. Also, if you still keep writing, the pad sounds 2 beeps.
Note! Under such circumstances, you need to erase unwanted digital pages if you
want to continue to write.
Note! In the following chapter, you will find that it is very easy to import, copy, move
and delete the digital pages when connecting the pad to your PC through USB
cable.
8