Specifications

your mouse. You can change the width by clicking a width button on the Width

toolbar by using your mouse.

4. By using the digital pen on the vertical pad, your writing or drawing on the paper

instantly appears on the corresponding position of the current page in the software

window. For example, your writing on the paper in the lower-left corner of the

vertical pad instantly appears in the lower-left corner of the current page in the

software window.

Note! When you write or draw, the software automatically adjust the current page

position in the active software window so that your writing or drawing can

be instantly visible in the active software window.

Note! You can switch both the paper page on the pad and the current page in the

software window.

Note! Even though the software window is not active, the activated On-line

Writing function still is available.

Note! If you close or minimize the software window in which the On-line Writing

function is activated, the On-line Writing function will be closed.

Note! Your writing or drawing will not be stored in any digital page file in the

storage device of the pad.

5. To close the On-line Writing function, click the On-line Writing button

on the Tools toolbar in the software window.

Note! When the On-line Writing function is closed, the tablet device function in

Windows of the horizontal pad will be activated. You can use the digital pen

on the horizontal pad to move the mouse pointer on the screen. Please

refer to the chapter — Tablet Device in Windows.

Causes of the On-line Writing Function Disabled or Closed

To use the On-line Writing function, please verify the followings, or the On-line Writing

function will be disabled or closed:

z The page size of the current page in the software window must be in accordance

with your DigiMemo model.

z The page size in accordance with the DigiMemo Model is shown below.

DigiMemo Model Page Size

DigiMemo L2 Letter

DigiMemo A402 A4

Note! The page size of the current page is shown in the lower-right corner of the

software window.

Note! The page size of a digital page which you import is in accordance with the

DigiMemo model which created it.

Note! The page size of a new page which you add in the e-Book file is according

to the Default New Page Size setting. If it is necessary to change the

setting, please refer to the section — Setting the Default New Page Size.

z If the On-line Writing function already be activated in one software window, it will

be disabled in other software windows.