Specifications

Appendixes

Replacing the Cartridge of the Digital Pen

Open the cartridge compartment cover on the

back of the digital pad. Two replacement ink

cartridges and one plastic pen tip are stored in

the cartridge compartment of the digital pad.

Clip Hole

To replace the cartridge of the pen, you may use a small clip to

gently pull the old one out. Then insert a new one and press the

cartridge tip firmly against a hard surface until it snaps into place.

You can also use the clip hole in the cartridge compartment to replace the cartridge.

1. Hold the digital pen upright and insert the cartridge tip into the wider

side of the clip hole.

2. Gently push the pen horizontally towards the narrow side of the clip hole

to as far as it can reach.

3. Gently pull out the cartridge from the pen.

4. Insert a new one. Then press the cartridge tip firmly against a hard

surface until it snaps into place.

Purchasing New Replacement Ink Cartridges

The specification of ink cartridge used for the digital pen is 2.3 mm/0.09" (Diameter) x

67 mm/2.64" (Length).

Note! The material of some ink cartridges may affect the performance of the digital

pen. Some ink cartridge with the different outside dimensions may damage the

digital pen.

Note! The following ink cartridges have been tested and approved for use with the

digital pen:

Brand Model

ACECAD Ink Cartridge Series

Cross 8518-1

Lamy M21

Sterling (Target) 01800T

SPALDING RFR80A

STAEDTLER 930-ASBK3V

Replacing the Battery in the Digital Pen

Even though the battery of the digital pen can last approximately 14 months, the battery

in the pen may be exhausted if any of the following situations occurs. If so, please

replace the battery.

z Severe missing digital ink strokes

z Serious lengthened or shortened digital ink strokes

z Significant twisted digital ink strokes