Specifications

Note! If a SD memory card is loaded in the digital pad, we recommend that you

remove the SD memory card from the pad.

1. While the digital pad is turned off, press and hold the Erase button

on the pad.

2. Meanwhile, press and hold the Power button on the pad until the

icon

appears on the display.

3. Release the Power button while continuing holding down the Erase button .

4. Then release the Erase button

5. When the reset is finished, the digital pad will be turned on.

Note! The display will show the current digital page 001 with no digital ink in the

built-in 32 MB storage device if no SD memory card is loaded in the pad.

Note! Do not format the built-in 32 MB storage device through the format function in

Windows. Or it will cause the incompatibility problem with the pad.

The File System Incompatibility of an Optional SD Memory Card —

the Error Code E02

If the error code E02 appears on the display of the digital pad, it indicates that the file

system of the optional SD memory card is incompatible with the digital pad. If you want

the digital pad to capture and store your handwriting in this optional SD memory card,

please format this memory card before use.

Note! Formatting an optional memory card permanently deletes all data and files it

contains. Before formatting, be sure to transfer to a computer any files you

would like to keep.

To format an optional SD memory card, execute the following steps:

1. Load the memory card into the digital pad.

2. Turn on your computer and start Windows.

3. Connect the digital pad to your computer.

4. Format the memory card with the file system FAT in Windows.

Note! The digital pad only supports an optional SD memory card with the file system

FAT. The digital pad does not support an optional SD memory card with other

file system.

The Damage or Incompatibility of an Optional SD Memory Card —

the Error Code E01

If the error code E01 appears on the display of the digital pad, it indicates that the

optional memory card may be damaged or the memory in the memory card is

incompatible with the digital pad. You can not use it with the pad.

The Full Root Directory — the Error Code E06

If the error code E06 appears on the display of the digital pad, it indicates that too many

files or folders in the root directory in the built-in 32 MB storage device or the optional

SD memory card. Move or delete some files or folders in the root directory.