1N Wireless Broadband Router User Guide 1
11N Wireless Broadband Router User Guide Copyright Statement is the registered trademark of Shenzhen Tenda Technology Co., Ltd. All the products and product names mentioned herein are the trademarks or registered trademarks of their respective holders. Copyright of the whole product as integration, including its accessories and software, belongs to Shenzhen Tenda Technology Co., Ltd. Without the permission of Shenzhen Tenda Technology Co.
11N Wireless Broadband Router User Guide Contents CHAPTER 1 PRODUCT INTRODUCTION ...................... 1 1.1 PACKAGE CONTENTS ............................. 1 1.2 LED INDICATORS AND PORT DESCRIPTION ............. 1 CHAPTER 2 PRODUCT INSTALLATION ........................ 4 CHAPTER 3 HOW TO CONFIGURE TO ACCESS THE INTERNET ............................................................................. 6 3.1 3.2 3.3 3.4 HOW TO SET THE NETWORK CONFIGURATIONS ............ 6 LOG IN TO THE ROUTER .................
11N Wireless Broadband Router User Guide 5.3 WIRELESS ACCESS CONTROL....................... 32 5.4 CONNECTION STATUS............................ 33 CHAPTER 6 DHCP SERVER ............................................. 34 6.1 DHCP SERVER ................................ 34 6.2 DHCP CLIENT LIST............................ 34 CHAPTER 7 VIRTUAL SERVER ...................................... 36 7.1 PORT RANGE FORWARDING ........................ 36 7.2 DMZ SETTINGS ............................... 38 7.
11N Wireless Broadband Router User Guide 10.9 LOG OUT ................................... 53 APPENDIX 1 GLOSSARY .................................................. 55 APPENDIX 2 PRODUCT FEATURES .............................. 56 APPENDIX 3 FAQ ............................................................... 57 APPENDIX 4 CLEAR WIRELESS CONFIGURATION . 59 APPENDIX 5 REGULATORY INFORMATION..............
11N Wireless Broadband Router User Guide Chapter 1 Product Introduction Thank you for purchasing the Tenda Wireless N Broadband Router! This easy-to-use router provides simple configuration interface which enables you to configure it with ease. It is based on the latest IEEE802.11n standard, and is backward compatible with devices of IEEE802.11b/g standards.
11N Wireless Broadband Router User Guide Back panel port show (take W316R as an example) 2
11N Wireless Broadband Router User Guide Back panel port description 3
11N Wireless Broadband Router User Guide Chapter 2 Product Installation In this user guide, we take W316R as an example to explain the installation steps. The installation steps of other products are similar to this one. 1. Please use only the included power adapter to power your router. (NOTE: Use of an unmatched power adapter could cause damage to this product). 2. Please connect the router’s LAN port to your computer with an Ethernet cable as shown below. 3.
11N Wireless Broadband Router User Guide 4. Insert the included software CD into the CD drive of your computer. After the software automatically initiates, double click the “Setup” icon and follow the instructions to complete the installation. You can also enter the router’s Web-based Utility to complete the configuration.
N Wireless Broadband Router User Guide Chapter 3 How to configure to access the Internet 3.1 How to Set the Network Configurations Network Configurations under windows XP 1. Right click “My Network Places” on your computer desktop and select “Properties”. 2. Right click “Local Area Connection” and select “Properties”. 3. Select “Internet Protocol (TCP/IP)” and click “Properties”.
11N Wireless Broadband Router User Guide 4. Select “Obtain an IP address automatically” and “Obtain DNS server address automatically”. Click “OK” to save the configurations. Or select “Use the following IP address” and enter the IP address, Subnet mask, Default gateway as follows: IP Address: 192.168.0.XXX: (XXX is a number from 2~254) Subnet Mask: 255.255.255.0 Gateway: 192.168.0.1 DNS server: You should input the DNS server address provided by your ISP.
11N Wireless Broadband Router User Guide Otherwise, you can enter 192.168.0.1. Click “OK” to save the configurations. Network Configurations under windows 7 1. Click the network icon on the lower right corner of your computer desktop, and then click” Open Network and Sharing Center”. 2. Click “Change adapter settings” on the left side of the window.
11N Wireless Broadband Router User Guide 3. Right click “Local Area Connection” and select “Properties”. 4. Double click” Internet Protocol Version 4(TCP/IPv4)".
11N Wireless Broadband Router User Guide 5. Select “Obtain an IP address automatically” and “Obtain DNS server address automatically”. Click “OK” to save the configurations. Or select “Use the following IP address” and enter the IP address, Subnet mask, Default gateway as follows: IP Address: 192.168.0.XXX: (XXX is a number from 2~254) Subnet Mask: 255.255.255.0 Gateway: 192.168.0.1 DNS server: You should input the DNS server address provided by your ISP.
11N Wireless Broadband Router User Guide Otherwise, you can enter 192.168.0.1. Click “OK” to save the configurations. 3.2 Log in to the Router 1. To access the Router’s Web-based Utility, launch a web browser such as Internet Explorer or Firefox and enter http://192.168.0.1. Press “Enter”. 2. The system will automatically choose the corresponding web language in accordance with the Browser’s language. For example, if your Browser’s language is French, the router’s web language will display as French.
11N Wireless Broadband Router User Guide 3.3 Fast Internet Access Two kinds of fast access methods are provided on the router’s web-based utility: ADSL dial-up and DHCP. If you select ADSL dial-up, you only need to enter the access account and access password as well as the wireless password, and then click “Ok” to complete the settings. If you select DHCP, you only need to enter the wireless password and click “Ok” to complete the settings.
11N Wireless Broadband Router User Guide The router provides two encryption setting screens, one is simple and easy, the other is advanced (For advanced setting, please refer to chapter 5.2). Simple and easy screen: Log on to the router’s web-based utility and you may set encryption for the router. The default adopts WPA-PSK mode and AES Algorithm. The default password is 12345678, as shown below.
11N Wireless Broadband Router User Guide Chapter 4 Advanced Settings 4.1 System Status System status screen allows you to view the router’s WAN port status and system status. Connection status: It displays the router’s WAN connection status. Disconnected: It indicates the router’s WAN port hasn’t been connected with the network cable. Connecting: It indicates the router’s WAN port is obtaining IP address. Connected: It indicates the Router is well connected with the ISP.
11N Wireless Broadband Router User Guide System time:It displays the system’s updated time Connected client :It displays the number of the connected computers(normally it displays the number of clients whose IP addresses obtained via DHCP server) Software version:It displays the Router’s software version; Hardware version:It displays the Router’s hardware version. 4.2 WAN Settings Virtual Dial-up (PPPoE) Mode: Show your current connection mode.
11N Wireless Broadband Router User Guide Connect Automatically: Connect automatically to the Internet after rebooting the system or connection failure. Connect on Demand: Re-establish your connection to the Internet after the specific time (Max Idle Time). Zero means you are connected to the Internet all times. Otherwise, enter the minutes to be elapsed before you are disconnected from the Internet. Connect Manually: Connect to the Internet by users manually.
11N Wireless Broadband Router User Guide DNS server: Enter the necessary DNS server provided by your ISP. Alternate DNS server: Enter the second DNS address if your ISP provides, which is optional. Dynamic IP (Via DHCP) If your connection mode is Dynamic IP, it means every time you access the Internet, you will get a different IP. You don’t need to enter any parameters in this mode, just Click “Ok” to finish the settings. PPTP Mode: Show your current connection mode.
11N Wireless Broadband Router User Guide Username/Password: Used to validate identity when connecting to the PPTP server. Address mode: Set the router’s IP address mode, you can select either “Dynamic” or “Static”. If your ISP doesn’t provide the IP address, please select “Dynamic”. IP address: Please enter the IP address provided by your ISP, inquire your local ISP if you are not clear. Subnet mask: Please enter the subnet mask provided by your ISP ,generally its 255.255.255.
11N Wireless Broadband Router User Guide Subnet mask: Please enter the subnet mask provided by your ISP ,generally its 255.255.255.0 Gateway: Please enter the gateway provided by your ISP, inquire your local ISP if you are not clear. All the above parameters are provided by ISP. 4.3 LAN Settings Click “Advanced settings” –LAN settings to enter the following screen. LAN MAC address: The Router’s LAN MAC address, which is unchangeable.
11N Wireless Broadband Router User Guide DNS setting: Select to enable the DNS server. Primary DNS address: Enter the necessary address provided by your ISP. Alternate DNS address: Enter the second DNS address if your ISP provides, which is optional. NOTE: After the settings are completed, reboot the device to activate the modified settings. 4.5 WAN Medium Type Wired WAN and wireless WAN NOTE: This function applies only to some of the products.
11N Wireless Broadband Router User Guide or you want to use it to amplify wireless signals. SSID: SSID (Service Set Identifier) is the identity of the wireless device. You can only access to the ISP’ network by entering the correct SSID, namely the SSID of the ISP’s wireless device. You can click the “Open scan” button to let the router automatically search the ISP’s available SSID. The SSID can also be the SSID of the superior wireless device when using wireless bridge.
11N Wireless Broadband Router User Guide Enable Bandwidth Control: To enable or disable the internal IP bandwidth control. The default is disabled. IP Address: The IP address range of the hosts whose traffic has been controlled. It can be a single IP address or IP address range. Upload/Download: To specify the traffic heading way for the selected IP addresses: upload or download. Bandwidth Range: The maximum and minimum upload/download data traffic of the hosts in specified IP range.
11N Wireless Broadband Router User Guide 1. Enter 192.168.0.100 in the IP address field 2. Select upload in the Upload/Download field. 3. Enter 10-15 in the bandwidth range field 4. Select “Enable” 5. Click “Add to list” 6. Click “Ok” to finish the upload rule settings. And then add a download rule as shown in the picture below. The setting method is the same as the above. Example 2 Set the download rate of all computers within the range of 192.168.0.2--192.168.0.
11N Wireless Broadband Router User Guide as shown in the picture below. The setting method is the same as Example 1. 4.7 Traffic Statistics Traffic statistics is used to display the bandwidth that LAN PC used.
11N Wireless Broadband Router User Guide Enable Traffic statistics: It is used to calculate the traffic used by the LAN computers. You can enable it to calculate the traffic for you. Usually, disable it to improve the router’s data packet processing ability, and the default is disabled. When this function is enabled, the webpage will refresh automatically every five minutes, meanwhile, each computer’s traffic value will refresh automatically.
11N Wireless Broadband Router User Guide Chapter 5 WLAN Settings 5.1 Wireless Basic Settings Enable wireless function: Select to enable the Router’s wireless features; deselect to disable it and all functions related with wireless are disabled. Wireless working mode: This router provides two kinds of working modes: Wireless Access Point(AP) and Network Bridge (WDS) Wireless Access Point (AP) Network Mode: Select one mode from the drop-down list.
11N Wireless Broadband Router User Guide Channel: The currently used channel by the router. Select an effective channel (from 1 to 13\Auto) of the wireless network. WMM Capable: Enable it to enhance the transfer performance of the wirelessly transferred multimedia data (such as video or online playing).We recommend enabling this option if you are not familiar with WMM. APSD Capable: It is used for auto power-saved service. The default is disabled.
11N Wireless Broadband Router User Guide AP MAC address: Input the MAC address of another (opposing) wireless router you want to connect. Example: This example is to bridge two W316R routers. 1. If you know the connecting router’s MAC address, please enter it into the AP MAC address field and click “Ok”.
11N Wireless Broadband Router User Guide 2. You can also search for the wireless router’s signal by scanning. a) Click “Open scan” and click the scanned signal and click the ”Ok” button on the dialog box and the corresponding wireless MAC address will be added to the AP MAC address field automatically. b) Click “Ok” after the MAC address is added. After finishing the above steps, you need to set the other W316R router in the same way.
11N Wireless Broadband Router User Guide WDS feature requires both routers support this function and the SSID, channel, encryption method and password are the same as those of the connecting router. 5.2 Wireless Security Settings With the wireless security function, you can prevent others from connecting to your wireless network and using the network resources without your consent. Meanwhile, you can also block illegal users from intercepting or intruding your wireless network. 5.2.
11N Wireless Broadband Router User Guide between them. When the WPS connection is completed, the LED indicator will be continuously lit. To add more clients, repeat the above steps.) PIN: If this option is enabled, you need to enter a wireless client’s PIN code in the field and keep the same code in the WPS client. Reset OOB: Press this button, the WPS client will be in an idle state, and the WPS indicator will turn off.
11N Wireless Broadband Router User Guide 5.2.3 WPA2- PSK WPA2 (Wi-Fi Protected Access version 2) provides higher security than and WPA (Wi-Fi Protected Access). WPA Algorithms: Provides TKIP [Temporal Key Integrity Protocol] or AES [Advanced Encryption Standard]. Key: Enter the pass phrase that consists of 8-63 ASCII characters. Key Renewal Interval: Set the key’s renewal period, which tells the device how often it should change the dynamic keys. 5.
11N Wireless Broadband Router User Guide MAC address filter: “Permit” indicates to allow the clients in the list to access the wireless network, “Forbid” indicates to prevent the clients in the list from accessing the wireless network. Configure MAC address: Input the MAC addresses of the wireless clients to implement the filter policy. Click “Add” to finish the MAC add operation. MAC Address list: Show the added MAC addresses. You can add or delete them. 5.
11N Wireless Broadband Router User Guide Chapter 6 DHCP Server 6.1 DHCP Server DHCP (Dynamic Host Control Protocol) is used to assign an IP address to the computers on the LAN/private network. When you enable the DHCP Server, the DHCP Server will allocate automatically an unused IP address from the IP address pool to the requesting computer in premise of activating “Obtain an IP Address Automatically”. So specifying the start and end address of the IP Address pool is needed.
11N Wireless Broadband Router User Guide Host name: It displays the name of the computer whose IP is allocated by the DHCP server. IP address: Enter the IP address which needs static binding. MAC address: Enter the MAC address of the computer you want to bind. Click “Add” to add the entry in the list. Lease time: The remaining time length of the corresponding IP address lease.
11N Wireless Broadband Router User Guide Chapter 7 Virtual Server 7.1 Port Range Forwarding Start/End port: Enter the start/end port number which ranges the External ports used to set the server or Internet applications. LAN IP: Enter the IP address of the PC which you want to set as the server. Protocol: Select the protocol (TCP/UDP/Both) for the application. If you are not clear about the protocol you are using, you can select “Both”.
11N Wireless Broadband Router User Guide server or your computer’s static IP address is 192.168.0.10, and you wish your friends can access the server through the default port 21 and adopts TCP protocol. Please follow the steps below to configure. 1.Enter 21 in both start port and end port fields, or you can also select FTP from the well-known service port and its port 21 will be added to the corresponding field automatically. 2. Enter 192.168.0.
11N Wireless Broadband Router User Guide 7.2 DMZ Settings The DMZ Settings screen allows one local computer to be exposed to the Internet for use of a special-purpose service such as Internet gaming or videoconferencing. DMZ hosting forwards all the ports at the same time to one PC. DMZ Host IP Address: The IP address of the LAN computer you want to set as DMZ host. Enable: Check to enable the DMZ host. For example: Set the computer at the IP address of 192.168.0.
11N Wireless Broadband Router User Guide Enable UPnP: Click the checkbox to enable the UPnP. NOTE: This function goes into effect under Windows XP or Windows ME (NOTE: the system should integrate or have installed the Directx 9.0) or this function would go into effect if you have installed software that supports UPnP.
11N Wireless Broadband Router User Guide Chapter 8 Security Settings 8.1 Client Filter Settings You can enable client filter to control LAN computers’ access to some ports of the Internet。 Filter Mode: You can select either “Permit only” or “Forbid only”. Access Policy: Select one number from the drop-down list. Remark: A simple description of the configured file. You can also leave it blank. Start/End IP: Enter the start/end IP address. Port: Enter the controlled TCP/UDP protocol port.
11N Wireless Broadband Router User Guide Example 2 Permit LAN computer with the IP address of 192.168.0.145 to access websites during 8:00 to 18:00 from Sunday to Saturday. 8.2 MAC Address Filter You can limit the computer’s access to Internet by MAC Address Filter.
11N Wireless Broadband Router User Guide Filter mode: You can select either “Permit only” or “Forbid only”. Access Policy: Select one number from the drop-down list. Remark: A simple description of the configured file. You can also leave it blank. MAC Address: Enter the MAC address you want to run the access policy. Time: Select the time range of MAC address Date: Select the day(s) to run the access policy.
11N Wireless Broadband Router User Guide 8.3 URL Filter Settings You can use URL filtering to forbid their access to certain websites at a specified time. Filter Mode: You can select either “Permit only” or “Forbid only”. Access Policy: Select one number from the drop-down list. Remark: A simple description of the configured file. You can also leave it blank. Start/End IP: Enter the start/end IP address. URL character string: Specify the text strings or keywords needed to be filtered.
11N Wireless Broadband Router User Guide with the access policy to pass through the router). Example1 Forbid all computers on LAN to access baidu.com during 8:00 to 18:00 from Monday to Friday. Example2 Permit LAN computers with the IP addresses of 192.168.0.100192.168.0.115 to access yahoo.com. NOTE: Enter only one domain name for each access policy for one access policy can only filter one domain name.
11N Wireless Broadband Router User Guide 8.4 Remote Web Management This section instructs how to allow the network administrator to manage the Router remotely. If you want to access the Router from outside of the local network, please click the checkbox after “Enable”. Enable: Check to enable remote web management. Port: The management port open to outside access. The default value is 80. IP Address: Specify the range of the IP addresses of the computers on the Internet for remote management.
11N Wireless Broadband Router User Guide Chapter 9 Routing Settings 9.1 Routing Table This page shows the router’s core routing table. The main duty for a router is to look for a best path for every data packet, and transfer this data packet to a destination station. In order to fulfill this function, many transferring paths, i.e. routing table, are saved in the router, for choosing when needed. 9.2 Static Routing This screen is used to set the router’s static routing.
11N Wireless Broadband Router User Guide 1. The gateway must be at the same net segment with the router’s LAN IP. 2. If the destination IP address is one host’ address, then the subnet mask must be 255.255.255.255. 3. If the destination IP address is an IP segment, then it must match with the subnet mask. For example, if the destination IP is 10.0.0.0 then the subnet mask must be 255.0.0.
11N Wireless Broadband Router User Guide Chapter 10 System Tools 10.1 Time Settings This section is to configure the router’s system time. You can set it manually or obtain the GMT time from the Internet. Time zone: Select the time zone where you are operating the Router from the drop-down list. Customized time: Enter the time you wish to configure. NOTE: When the Router is powered off, the time settings will be lost.
11N Wireless Broadband Router User Guide Main features: 1. Mostly, your ISP provides a dynamic IP address and the DDNS is used to capture the changeable IP address and match to the fixed domain. Then users can have access to the Internet to communicate with others outside the network. 2. DDNS can help you to establish a virtual host in your home or company. DDNS: Click the radio button to enable or disable the DDNS service.
11N Wireless Broadband Router User Guide Backup Setting: Click the Backup button to back up the Router’s settings and select a path to save them. Click the “Save” button to save the configuration files. Restore Setting: Click the “Browse” button to select the backup files.
11N Wireless Broadband Router User Guide Click the “Restore” button to restore previous settings. 10.4 Restore to Factory Default This screen allows you to restore all settings to the factory default values. Restore: Click this button to restore to default settings. Factory default settings: Password: NULL(the default password displays as null) IP address: 192.168.0.1 Subnet mask: 255.255.255.
11N Wireless Broadband Router User Guide Browse: Click this button to select the upgrade file. Upgrade: Click this button to start the upgrading process. After the upgrade is completed, the router will reboot automatically. 10.6 Reboot the Router Reboot the router to make the configuration effective. The router will cut its WAN connection automatically after rebooting. Reboot the router: Click this button to reboot the router. 10.
11N Wireless Broadband Router User Guide Old password: Enter the old password. New password: Enter a new password. Confirm new password: Re-enter to confirm the new password. NOTE: The default password displays as null, users can log on the web-based utility without any authentication. To secure the router and your network, it is highly recommended that you change the initial password. 10.8 Syslog The section is to view the system log.
11N Wireless Broadband Router User Guide 54
11N Wireless Broadband Router User Guide Appendix 1 Glossary Channel: An instance of medium use for the purpose of passing protocol data units (PDUs) that may be used simultaneously, in the same volume of space, with other instances of medium use(on other channels) by other instances of the same physical layer (PHY),with an acceptably low frame error ratio(FER) due to mutual interference. SSID: SSID (Service Set Identifier) is the network name shared by all devices in a wireless network.
11N Wireless Broadband Router User Guide Appendix 2 Product Features Supports IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.3 and IEEE 802.3u standards. High gain omni-directional antenna, with strong signals and long transmission distance.
11N Wireless Broadband Router User Guide Appendix 3 FAQ This section provides some solutions to the problems which may occur during the router’s installation or usage. The instructions below may help you deal with the problems. If your problem is not in the list, please log into our website www.tenda.cn or send an E-mail to support@tenda.cn, and we will reply to you at the earliest time. 1.
11N Wireless Broadband Router User Guide modify the default MTU value (1492). Please open the “WAN Setting” and modify the MTU value with the recommended value as 1450 or 1400. 5.How to share my computer’s resource with other users in Internet? If you want Internet users to access the internal server via the router such as: e-mail server, Web, FTP. You can configure the “Virtual Server”. Step 1: create your internal server, make sure the LAN users can access these servers and know related service port.
11N Wireless Broadband Router User Guide Appendix 4 Clear Wireless Configuration Clear Wireless configuration file under windows XP 1. Right click “My Network Places” on your computer desktop and select “Properties”. 2. Right click “Wireless Network Connections” and select “Properties”. 3. Click “Wireless Network Configuration” and clear the corresponding wireless configuration file as shown below.
11N Wireless Broadband Router User Guide Clear Wireless configuration file under windows 7 1. Right click “Network” and click “Properties”. 2. Click “Manage wireless networks” on the left side of the window.
11N Wireless Broadband Router User Guide 3. Delete the corresponding configured file in the “Manage wireless networks”.
11N Wireless Broadband Router User Guide Appendix 5 Regulatory Information EU Declaration or Declaration of Conformity Hereby, SHENZHEN TENDA TECHNOLOGY CO.,LTD, declares that this Wireless Broadband Router is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
11N Wireless Broadband Router User Guide Caution! The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment.