User Manual

devices. Check this box if you need to connect to CCX-compatible wireless
devices.
Turn on CCKM
Check this box to enable CCKM (Cisco Centralized Key Management), which
enables wireless clients to roam between CCKM-enabled accesses points in
very short time.
Enable Radio
Measurement
When you’re connecting to CCX-compatible access point, check this box to
enable radio measurement function to improve wireless connectivity.
Non-Serving Channel
Measurements
When you’re connecting to CCX-compatible access point, check this box to
enable measurement on unused radio channels to improve wireless
connectivity.
Limit --- milliseconds
Limit the time used for said measurement to a certain time. Default value is 250.
After you finish the settings, click ‘Apply’ to apply new settings, and click ‘OK’ to close configuration utility.