User Manual

in this window will be activated or deactivated respectively.
WMM – Power Save
Enable
Enable WMM power saving mode to save energy and lets your battery live
longer.
Setting...
Click this button to select the WMM data type which will suppress the function of
power saving. When this kind of data is transferring, power saving function will
be disabled. Available data types are AC_BK (Background / Low Priority),
AC_BE (Best Effort), AC_VI (Video First), and AC_VO (Voice First).
Direct Link
Enable or disable direct link setup (DLS) function.
Setup Enable
This function will greatly improve the data transfer rate between WMM-enabled
wireless devices. Please click ‘Apply’ button on the right of this check box after
you check or uncheck this box, so corresponding settings in this window will be
activated or deactivated respectively.
MAC Address
Input the MAC address of another WMM-enabled wireless device you wish to
establish a direct link here, then click ‘Apply’ to add this MAC address to DLS
address table.
Timeout Value
Input the timeout value of this WMM-enabled direct link wireless device. If the
wireless device is not responding after this time, it will be removed from DLS
table.
Tear Down
If you want to remove a specific wireless device from DLS table, select the
device and click this button to remove it.
After you finish the settings, click ‘OK’ to close configuration utility.