User Manual

2-7-2 WPS Setup - PIN
If the wireless access point you wish to connect supports PIN, please follow the following instructions to
establish connection to it:
1. Right-click the Ralink configuration utility icon located at lower-right corner of computer desktop, then click
‘Launch Config Utilities’.
2. Click ‘WPS Configuration’ tab, and the following settings will appear:
The PIN number of your wireless network card is an eight-digit number located at the upper-right position of
configuration utility. Remember it, and input the number to your wireless access point as the WPS PIN code
(Please refer to the user manual of your wireless access point for instructions about how to do this).