User Manual

Beacon(ms)
You can define the time interval that a beacon signal should be send. Default
value is 100. Do not modify this value unless you know what will be affected.
TX Power
You can select the wireless output power here. Please select a proper output
power setting according to your actual needs. You may not need 100% of output
power if other wireless clients are not far from you.
Idle Time
Select the idle time of your wireless network card. Default value is 300. Do not
modify this value unless you know what will be affected.
No forwarding among
wireless clients
Check this box and wireless clients will not be able to share data with each
other.
Hide SSID
Check this box and the SSID will not be broadcasted to the public. Your wireless
clients must know the exact SSID to be able to connect to your computer. This
option is useful to enhance security level.
Allow BW 40 MHz
Check this box to allow BW 40MHz capability.
Default
Click this button to restore all settings in this page back to default value.
Apply
Click this button to activate current settings.
To exit, click ‘X’ button at the upper-right corner of configuration window.