User Manual

wireless network.

MBSSID AP Isolation: Enable/Disable this function.

BSSID: Displays the Basic Service Set Identity (BSSID) of this router. This parameter is the same as the MAC

address of LAN port.

WDS (Wireless Distribution System):

WDS Mode: Default is Disable, there are 3 Mode can choose, Lazy Mode(Auto), Bridge Mode(Bridge Only) and

Repeater Mode(AP + Bridge).

Phy Mode: Select the option in the drop-down list to enable CCK, OFDM, HTMIX, or GREENFIELD mode for

physical layer transceivers.

EncrypType: Select the option in the drop-down list to enable WEP, TKIP, and AES encryption types. If you

select None, any data will be transmitted without encryption and any station can access the router.

EncrypKey: For encryption type of TKIP and AES, you have to fill in the WPA encryption key. Please use Pass

Phrase (8~32bytes) key format.

AP MAC Address: For encryption type of TKIP and AES, you have to fill in the WDS AP MAC. You can fill up to 4

sets of WDS AP MAC lists.

Other :

HT TxStream: Set the Tx via 1 or 2 antennas.

HT RxStream: Set the Rx via 1 or 2 antennas.