User Manual

27
multicast messages.
Fragment Threshold: This value should remain at its default setting of 2346. If you experience a high packet
error rate, you may slightly increase your fragmentation threshold within the value range of 0 to 2346. Setting the
fragmentation threshold too low may result in poor performance.
RTS Threshold: Request To Send threshold. This value should remain at its default setting of 2347. If you
encounter inconsistent data flow, only minor modifications to the value range between 1 and 2347 are
recommended.
Tx Power: Transmit power. You can set the output power of wireless radio. This value should remain at its default
setting of 100. If you
Short Preamble: The length of CRC blocks in the frames during the wireless communication.
Short Slot: Indicates that the 802.11g network is using a short slot time because there are no legacy (802.11b)
stations present
Tx Burst: Select to enable or disable connecting to a Tx Burst supported device.
Pkt_Aggregate: To aggregate lots of packets into a big one before transmitting packets. This can reduce control
packet overhead.
IEEE 802.11H Support: Enable/Disable.
Country Code: Select wireless country code. Six countries can choose.