User Manual

35
3.5.4 WPS Setting
The primary goal of Wi-Fi Protected Setup (Wi-Fi Simple Configuration) is to simplify the security setup and
management of Wi-Fi networks. This Router supports the configuration setup using PIN configuration method or
PBC configuration method through an internal or external Registrar.
WPS: Enable/Disable the WPS. Default setting is disable.
WPS Summary: Shows the information of WPS current status, configured, SSID, authentication mode, and
pre-shared key. Click on Reset OOB button to Reset WPS AP to the OOB (out of box) configuration.
WPS Progress: Show the WPS current status.
WPS mode:
PIN method (Personal Identification Number): read the PIN from either a sticker on the new STA or a display.
PBC method (Push Button Communication): in which the user simply has to push a button, either an actual or
virtual one, on both the AP and the new STA. (Users can simply push the
PIN: Users have to fill in the PIN code to enrollee device if selecting PIN mode as the WPS Config method.