User Manual

5
Chapter 1 Introduction
Congratulations on your purchase of an Instant Wireless 11n Router for cable/xDSL application. The Wireless 11n
Router is the perfect option to connect a small group of PCs to a high-speed Broadband Internet connection or to
an Ethernet backbone. Configurable as a DHCP server, the Broadband Router acts as the only externally
recognized Internet device on your local area network (LAN). The Router serves as an Internet firewall, protecting
your network from being accessed by outside users. The data rates up to 300Mbps for wireless connection, user
can easy to share HD video or data transfer.
1.1 Overview
Wireless 11n will replace the 11b/g as the new generation solution. Via MIMO technology, the wireless through
put and coverage can be better than 11b/g.The new WPS technology, will be very easy to set the wireless security
just push the button only, all the wireless encryption will auto finish.
1.2 Features
z Router Mode
‧PPP over Ethernet (RFC-2516)
‧DHCP Server and Client
‧NAPT (Network Address and Port Translation)
‧NAT (Network Address Translation
z Internet Access
‧TCP/IP, UDP, ICMP, ARP, RARP, PPPoE, NAT, DHCP (client/server), Static IP assignment
z Security Features
‧Password protected configuration access
‧User authentication (PAP/CHAP) for PPP connection
z Wireless Features
‧Support 802.11b/g, 802.11n draft 3.0 Wireless Access Point
‧Support 128-Bit and 64-Bit WEP encryption , 802.1x, WPA, WPA2, WPS
‧Support wireless operation mode as AP, WDS and AP Client
z Security
‧Support packet inspection and filtering
‧Intrusion detection and protection
‧Password protected system management