User Manual

the owner of access point to ask for correct passphrase /
security key.
4. The access point you wish to connect only allows
network cards with specific MAC address to establish
connection. Please go to ‘About’ tab and write the value
of ‘Phy_Addess’ down, then present this value to the
owner of access point so he / she can add the MAC
address of your network card to his / her access point’s
list.
The network is slow / having
problem when transferring large
files
Move closer to the place where access point is located.
Enable ‘Wireless Protection’ in ‘Advanced’ tab.
Try a lower TX Rate in ‘Advanced’ tab.
Disable ‘Tx Burst’ in ‘Advanced’ tab.
Enable ‘WMM’ in ‘QoS’ tab if you need to use multimedia
/ telephony related applications.
Disable ‘WMM – Power Save Enable’ in ‘QoS’ tab.
There could be too much people using the same radio
channel. Ask the owner of the access point to change
the channel number.
Please try one or more solutions listed above.