User Manual

2-3-2 Using 802.1x – Certification

After you click ‘802.1x Setting’, a new window will appear:

Here are descriptions of every setup items:

thentication Type

Please select an 802.1x authentication type here. The type you select here

must be identical to the type of the 802.1x authentication type you’re using.

Session Resumption

You can enable or disable session resumption here. If you don’t know if you

should enable session resumption or not, please ask your 802.1x authentication

administrator.

Identity

Please input 802.1x identity here.

Password

Please input the password of 802.1x identity here.

Domain Name

Please input the domain name of 802.1x authentication here. This field will be

grayed out when authentication type is not ‘EAP-FAST’.

Use Client

If the authentication type you use is ‘PEAP’ or ‘TTLS’, you can use the certificate

stored on your computer. If the authentication type you use is ‘TLS/Smart Card’,

this box is always checked.

Allow

unauthenticated

This box is always checked and can not be modified.