User Manual

provision mode
Use protected
authentication
credential
If the authentication type you use is ‘EAP-FAST’ you can use protected
authentication credential by check this box.
Remove
Remove the credential you imported previously.
Import
Import the authentication credential file (PAC or al file format), you’ll be
prompted to select a credential file from your computer.
Protocol
You can select the protocol of tunneled authentication here. This pull down
menu is only available when authentication type you use is ‘PEAP’ or ‘TTLS’.
When you use ‘EAP-FAST’ as authentication type, the protocol setting is always
‘Generic Token Card’ and can not be changed.
Identity (of tunneled
authentication)
Please input the identity of tunneled authentication here.
Password (of tunneled
authentication)
Please input the password of tunneled authentication here.
Password Mode
Please select the password mode of ‘EAP-FAST’ authentication mode.
This setting is hidden when the authentication type is not ‘EAP-FAST’.
After you finish all settings, click ‘OK’ to save settings and exit.