Installation guide

Quick Installation Guide of Wireless 802.11g Broadband Router
~ Version 1.0 ~
3 of 11
4. WAN LED .
ACT Flashing Data is transmitting or receiving on the WAN
interface
On Port linked.
Off No link.
Antenna
LAN
WAN
Powe
r
Reset
Figure 2 – WLAN Broadband Router Rear Pane
Interfaces Description
1. Antenna The Wireless LAN Antenna.
2. Power The power jack allows an external DC +7.5 V power supply
connection.
The external AC to DC adaptor provide adaptive power
requirement to the WLAN Broadband Router.
3. LAN The RJ-45 sockets allow LAN connection through Category 5
cables. Support auto-sensing on 10/100M speed and half/ full
duplex; comply with IEEE 802.3/ 802.3u respectively.
4. WAN The RJ-45 socket allows WAN connection through a Category
5 cable. Support auto-sensing on 10/100M speed and half/ full
duplex; comply with IEEE 802.3/ 802.3u respectively.
5. Reset Push continually the reset button 5 ~ 10 seconds to reset the
configuration parameters to factory defaults.