User`s guide

WWW.SparkLAN.com
User’s Guide
15
4.4. DHCP
The DHCP screen allows you to configure the settings for the Router's Dynamic Host Configuration
Protocol (DHCP) server function. The Router can be used as a DHCP server for your network. A
DHCP server automatically assigns an IP address to each computer on your network. If you choose to
enable the Router's DHCP server option, you must configure your entire network PCs to connect to a
DHCP server, the Router.
If you disable the Router's DHCP server function, you must configure the IP Address, Subnet Mask,
and DNS for each network computer (note that each IP Address must be unique).
DHCP Server: Select the Enable option to enable the Router's DHCP server option.
If you already have a DHCP server on your network or you do not want a DHCP server, then
select Disable from the options.
Starting IP Address: Enter a numerical value for the DHCP server to start with when issuing IP
addresses. Because the Router's default IP address is 192.168.1.1, the Starting IP Address must
be 192.168.1.2 or greater, but smaller than192.168.5.253. The default Starting IP Address is
192.168.1.100.
Number of DHCP Users: Enter the maximum number of PCs that you want the DHCP server to
assign IP addresses to. The absolute maximum is 253 - possible if 192.168.1.1 is your starting IP
address. The default is 50.
Client Lease Time: The Client Lease Time is the amount of time a network user will be allowed
connection to the Router with their current dynamic IP address.
Enter the amount of time, in minutes, that the user will be "leased" this dynamic IP address. The
default is 0 minutes, which means one day.
Static DNS 1-3: The Domain Name System (DNS) is how the Internet translates domain or website
names into Internet addresses or URLs. Your ISP will provide you with at least one DNS Server