User's Manual

1. Make sure you have turned Bluetooth on.

2. Touch “SEARCH FOR DEVICES” and your phone starts scanning for

Bluetooth devices within range. As they are found, the devices appear in the list

of Bluetooth devices.

3. To pair with a device in the list, select it.

4. Type the device’s PIN and then ‘OK’.

5. Once paired, select the device name to connect.

6. Pairing and connection status appear under the device name.

7. Once the other Bluetooth device shows “connected” status, you can start

using it to make and receive phone calls.

8. To un-pair with a device, touch the icon on the side of device to open the

context menu. Select Un-pair, as appropriate. If you select ‘Un-pair’ when

connected, you will be disconnected as well.

Notes: The phone supports only the headset and hands-free Bluetooth profiles,

so if you try to connect to a device that is not a headset or hands-free car kit,

then you will receive an “unable to connect” message.

If you pair with a second headset while connected to the first, the first headset

will remain connected. To switch connection to the second headset you must

manually select that headset again after pairing.

Rescan for Bluetooth devices

If you want to update the list of Bluetooth devices, select ‘Scan for devices’.

5 Contacts

The contacts on your phone are synced with your account contacts stored on the

Web.

To view the contacts on your phone, touch

and select People.

Contacts belonging to a specific group (you can choose which group) are listed

in the Contacts tab. Only those contacts you star as “favorites” are listed in the

Favorites tab. Browse through your contacts by sliding your fingertip up and

down on the screen. Another way to find a contact quickly is to use “SEARCH”

button, input the first letter of the name you’re looking for and touch search icon,