Instruction Manual

Chapter 1 25
Power Management
Power Saving Mode Phenomenon
Standby Mode
!
Waiting time specified by the
System Standby value or the
operating system elapses
without any system activity.
!
Closing the display cover
!
When the computer is about to
enter Hibernation mode (e.g.,
during a battery-low condition),
but the Hibernation file is invalid
or not present.
!
When customized functions for
power management are set to
Standby and the corresponding
action is taken.
!
Invoked by the operating
system power-saving modes.
!
The buzzer beeps
!
The Sleep indicator lights up
Hibernation Mode
!
When customized functions for
power management are set to
Hibernation and the
corresponding action is taken.
!
Invoked by the operating
system power-saving modes.
!
All power shuts off
Display Standby Mode
Keyboard, built-in touchpad, and an
external PS/2 pointing device are
idle for a specified period.
!
The display shuts off
Hard Disk Standby Mode
Hard disk is idle within a specified
period of time.
!
Hard disk drive is in standby mode.
(spindle turned off)
Environmental Requirements
Item Specification
Temperature
Operating +5 ~ +35°C
Non-operating -10 ~ +60°C
Non-operating -20 ~ +60°C (storage package)
Humidity
Operating 20% ~ 80% RH, non-condensing
Non-operating 20% ~ 90% RH, non-condensing (Unpacked)
Non-operating 20% ~ 90% RH, non-condensing (storage package)
Vibration
Operating (unpacked) 5 ~ 25.6 Hz: 0.38mm (peak to peak)
25.6 ~ 250 Hz: 0.5G
Non-operating (unpacked) 5 ~ 27.1 Hz: 0.6G
27.1 Hz ~ 50 Hz: 0.4mm (peak to peak)
50 ~ 500 Hz: 2.0G
Non-operating (packed) 5 ~ 62.6 Hz: 0.51mm (peak to peak)
62.6 Hz ~ 500 Hz: 4G