Datasheet

ManualsBrandsAcer Manualscomputer components43W4036

Dual-Core Intel® Xeon® Processor 5200 Series Electrical Specifications

Notes:

1. When the “111111” VID pattern is observed, the voltage regulator output should be disabled.

2. Shading denotes the expected VID range of the Dual-Core Intel® Xeon® Processor 5200 Series

3. The VID range includes VID transitions that may be initiated by thermal events, assertion of the FORCEPR# signal (see

Section 6.2.4), Extended HALT state transitions (see Section 7.2.2), or Enhanced Intel SpeedStep

Technology transitions

(see Section 7.3). The Extended HALT state must be enabled for the processor to remain within its specifications

4. Once the VRM/EVRD is operating after power-up, if either the Output Enable signal is de-asserted or a specific VID off code is

received, the VRM/EVRD must turn off its output (the output should go to high impedance) within 500 ms and latch off until

power is cycled. Refer to Voltage Regulator Module (VRM) and Enterprise Voltage Regulator-Down (EVRD) 11.0 Design

Guidelines.

Table 2-3. Voltage Identification Definition

HEX VID6 VID5 VID4 VID3 VID2 VID1 V

CC_MAX

HEX VID6 VID5 VID4 VID3 VID2 VID1 V

CC_MAX

7A 1 1 1 1 0 1 0.8500 3C 0 1 1 1 1 0 1.2375

78 1 1 1 1 0 0 0.8625 3A 0 1 1 1 0 1 1.2500

76 1 1 1 0 1 1 0.8750 38 0 1 1 1 0 0 1.2625

74 1 1 1 0 1 0 0.8875 36 0 1 1 0 1 1 1.2750

72 1 1 1 0 0 1 0.9000 34 0 1 1 0 1 0 1.2875

70 1 1 1 0 0 0 0.9125 32 0 1 1 0 0 1 1.3000

6E 1 1 0 1 1 1 0.9250 30 0 1 1 0 0 0 1.3125

6C 1 1 0 1 1 0 0.9375 2E 0 1 0 1 1 1 1.3250

6A 1 1 0 1 0 1 0.9500 2C 0 1 0 1 1 0 1.3375

68 1 1 0 1 0 0 0.9625 2A 0 1 0 1 0 1 1.3500

66 1 1 0 0 1 1 0.9750 28 0 1 0 1 0 0 1.3625

64 1 1 0 0 1 0 0.9875 26 0 1 0 0 1 1 1.3750

62 1 1 0 0 0 1 1.0000 24 0 1 0 0 1 0 1.3875

60 1 1 0 0 0 0 1.0125 22 0 1 0 0 0 1 1.4000

5E 1 0 1 1 1 1 1.0250 20 0 1 0 0 0 0 1.4125

5C 1 0 1 1 1 0 1.0375 1E 0 0 1 1 1 1 1.4250

5A 1 0 1 1 0 1 1.0500 1C 0 0 1 1 1 0 1.4375

58 1 0 1 1 0 0 1.0625 1A 0 0 1 1 0 1 1.4500

56 1 0 1 0 1 1 1.0750 18 0 0 1 1 0 0 1.4625

54 1 0 1 0 1 0 1.0875 16 0 0 1 0 1 1 1.4750

52 1 0 1 0 0 1 1.1000 14 0 0 1 0 1 0 1.4875

50 1 0 1 0 0 0 1.1125 12 0 0 1 0 0 1 1.5000

4E 1 0 0 1 1 1 1.1250 10 0 0 1 0 0 0 1.5125

4C 1 0 0 1 1 0 1.1375 0E 0 0 0 1 1 1 1.5250

4A 1 0 0 1 0 1 1.1500 0C 0 0 0 1 1 0 1.5375

48 1 0 0 1 0 0 1.1625 0A 0 0 0 1 0 1 1.5500

46 1 0 0 0 1 1 1.1750 08 0 0 0 1 0 0 1.5625

44 1 0 0 0 1 0 1.1875 06 0 0 0 0 1 1 1.5750

42 1 0 0 0 0 1 1.2000 04 0 0 0 0 1 0 1.5875

40 1 0 0 0 0 0 1.2125 02 0 0 0 0 0 1 1.6000

3E 0 1 1 1 1 1 1.2250 00 0 0 0 0 0 0 OFF