User's Manual

22
TAKING PHOTOGRAPHS
Photography in the Auto Capture Mode [ ]
Your camera provides a single image capturing, continuous image capturing and auto
exposure bracketing capturing. It is equipped with both an optical viewfinder and a 1.5”
full color TFT LCD monitor to compose images. Taking images by using the optical
viewfinder will conserve more battery power. If your battery is in low level, it is
recommended to compose images by using the viewfinder. The LCD monitor can
help you accurately compose the pictures and examine all details. However, this
may also consume you more battery power.
Using the Viewfinder
1. Turn the camera on by pressing the POWER
button.
2. Set the mode dial to [
].
3. Compose your shot in the viewfinder.
Turn the “diopter adjustment dial” until the
image appears clearly within the viewfinder.
4. Press the shutter button down halfway, then
press it down fully.
The viewfinder LED indicator lights red while
the camera is processing a captured image.
Note:
Voice memo is starting to record at still image
capture mode just after the photograph is taken in
case of activating this function. It provides 10
seconds for recording and only can be done
once. To terminate recording, press the shutter
button down fully.