User's Manual

File Number

Reset the file number.

Default reset: Folder number is 100 and file number is 0001.

1. Set the mode dial to [SET-UP] and power on the camera.

2. Use the c or d button to select File Number.

3. Press the SET button.

File Number menu is displayed on the LCD

monitor.

4. Use the c or d button to select Execute/Cancel.

[Execute]: Reset the file number.

[Cancel]: Does not reset the file number.

5. Press the SET button to confirm the setting.

Note:

If folder already exists on SD Memory Card, it assigns older number than the existing

folder.

Format

Formatting erases all images and reformats the SD Memory Card loaded in your

camera. Protected images are also erased. SD Memory Card cannot be formatted if it

is write-protected.

1. Set the mode dial to [SET-UP] and power on the

camera.

2. Use the c or d button to select Format.

3. Press the SET button.

“Format SD card” menu is displayed on the

LCD monitor.

4. Use the c or d button to select Execute/Cancel.

[Execute]: Format the memory card.

[Cancel]: Does not format the memory card.

5. Press the SET button to confirm the setting.