User Guide

Altos R720 Installation Configuration Guide 16
Chipset Driver Installation
1. After the installation completes, you would see the following other
devices listed in Device Manager.
2. Please insert the EasyBUILD 7.1 build 100 into the optical drive
3. Expand Drivers -> Altos R720 -> Chipset and double-click on Windows
2000.
4. Follow the instruction to install the driver and reboot the server after the
chipset driver is installed.
Gigabit Ethernet Driver Installation
1. There are two Ethernet Controller listed under Other device in Windows
Device Manager. It should be the onboard Intel 82563EB Gigabit Ethernet
controller. You could find the driver in EasyBUILD 7.1 build 100. Please do
the same on the both of the devices.
2. Right-click on the Ethernet Controller and select Properties.
3. Select Driver tab and click on Update Driver.
4. Follow the instructions. Select Search for a suitable driver for my device
(Recommended) and click on Next.
5. Check on the Specify a location and click on Next to specify the path for
the driver. Please refer to the Directory on EasyBUILD 7.1 build 100 for
NIC driver in Driver required section.