User Guide

21 Altos R720 Installation Configuration Guide
ES1000
Onboard USB 2.0 N/A OS built-in
IOAT N/A OS built-in
Software Required
The management utility of integrated SAS RAID can be found in the EasyBUILD
7.1 build 100 (or later).
Software Version Directory on EasyBUILD
Intel RAID Web
Console
1.13-00 \app\r720\raid\Integrated_SAS\Linux\
Configuring integrated SAS RAID
Please refer to the Appendix A. for the integrated SAS RAID configuration.
Installation Tips
NOTE. There is no built-in driver Integrated SAS RAID in the Red Hat Enterprise
Linux 4.0 Update2. If you do not have the optional internal USB floppy drive,
you need an external USB floppy drive for applying driver during the OS
installation.
1. Since Red Hat Enterprise Linux 4.0 Update2 cannot recognize the
integrated SAS RAID, you need to make a driver diskette from the
EasyBUILD 7.1 build 100 first before the installation.
2. Type linux dd when the prompt boot: appears at the start.
3. Please select the sda as the Driver Disk Source.
4. Follow the instruction to load the integrated SAS RAID driver from the
driver diskette.
5. At the Package Installation Defaults, select Customize software packages
to be installed.
6. At the Package Group Selection step, select Development Tools under
Development.
7. Follow the normal procedure to finish the installation.
Gigabit Ethernet Driver Installation
1. You can find the Intel 82546EB driver in EasyBUILD 7.1 build 100. Please
refer to directory of the 82546EB driver in Driver Required section and
copy the driver from the EasyBUILD 7.1 build 100 to HDD first.
# mount /media/cdrecorder
# cp –R /media/cdrecorder/Disk/R720/NIC/Intel/pro1000.lx/. /tmp
2. Change the directory to the driver source and install the driver
# cd /tmp/src/