User guide

403
RIP
The RIP link opens the following links for configuration of RIP protocol:
• “RIP Basic Settings” on page 403
• “Interfaces” on page 404
• “Neighbors List” on page 406
• “Security Settings” on page 407
• “Address Summarization” on page 408
RIP Basic Settings
Clicking the BASIC SETTINGS tab brings up the RIP BASIC SETTINGS page.
The parameters for this page are shown in the following table.
Circuit ID This parameter specifies the DHCP Relay Circuit
identifer.
Remote ID This parameter specifies the Remote identifer.
Parameter Description