User guide

451

GMP Snooping

The GMP Snooping link allows you to configure GMP Snooping

through the following pages:

• “IGMP Snooping Configuration” on page 451

• “IGMP Snooping Timer” on page 453

• “IGMP Snooping Interface” on page 454

• “IGMP Snooping VLAN Router” on page 455

• “IGMP MAC Forwarding” on page 456

IGMP Snooping Configuration

Clicking the BASIC SETTINGS tab brings up the IGMP SNOOPING

CONFIGURATION page, which allows you to configure IGMP snooping

parameters. The parameters for this page are shown in the following

table.

Parameter Description

System Control This parameter

Starts

Shutsdown

IGS in the switch.

IGMP Snooping

Status

This parameter enables or disables IGMP snooping

globally in the switch. To enable IGS, GMRP status must

Disabled