English Trademarks VGA & 8514/A are registered trademarks of the IBM Corporation. Super VGA is a registered trademark of VESA.
English CONTENTS FCC warning ..........................................................E-1 DOC notice .............................................................E-1 Safety precautions ..................................................E-1 Packing contents .....................................................E-2 Unpacking procedure ..............................................E-2 Repacking ...............................................................E-2 Introduction .....................................
English E-1 FEDERAL C OMMUNICATIONS COMMISSION (FCC) WARNING nstruction to Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
E-2 PACKING CONTENTS The package contains: • CRT monitor • AC power cord • User manual INTRODUCTION This microprocessor-based, digital control 17” color monitor is a high performance and easy to use product. UNPACKING PROCEDURE 1 2 It employs the latest on-screen-menu technology. The microprocessor capability offers 13 most commonly used VESA timing modes preset in the factory, and 6 modes for user to adjust to the special timings that user might have.
English E-3 INSTALL THE MONITOR • • • To connect the tilt/swivel base to the monitor, align hooks with the sockets on bottom side of the monitor, and gently push the base towards the front of the monitor. The 15-pin D-shell signal connector on the signal cable will connect easily to the video adapter output on your personal computer. Lock both screws on the connector to ensure a firm connection. Turn the PC power switch ON. Then turn the monitor power switch ON, by pressing the switch inward.
E-4 USER CONTROLS AND INDICATORS a b c a. Displays menu & exits menu b. Scrolls through menu to choose an icon for adjustment / Adjusts level of selected icon c. Confirms menu selection 1 2 1. Power LED 2.
English E-5 USING THE ON-SCREEN DISPLAY 1) Menu screen-press the 1 button to display the menu below and exit menus Select mark Press the button to move the selection mark to the desired location. Adjustment icons 1: CONTRAST The item presently being adjusted is shown. When the 2 button is pressed. The selected adjustment screen appears. :2 CONTRAST V.SIZE ROTATION DEGAUSS BRIGHTNESS V.POSITION COLOR RECALL 1: H.SIZE V.PINCUSHION LANGUAGE H.MOIRE H.POSITION TRAPEZOID DISP.FREQ V.
E-6 INDIVIDUAL ADJUSTMENT CONTRAST adjustment Adjust the screen contrast to match your personal perference. Press the button to decrease contrast and press the button to increase it. Direct operation: You can access the CONTRAST adjustment screen by pressing the or before entering the menu screen. Press the 2key toggles between CONTRAST and BRIGHTNESS. BRIGHTNESS adjustment Adjusts the brightness to get the desired background level.
English E-7 COLOR selection The white of the image can be adjusted. 1) Use the button to select: (1)9300 OK, (2)6500 OK or (3)User color. 2) If the (3):the user’s color is selected, “2” appears in the lower right of the On-Screen Menu. Press the 2 button to display the USER COLOR adjustment screen. USER COLOR The white of the video image can be adjusted to the user’s preferred color. 1) Use the 2 button to select R (red), G (green) or B (blue). 2) Use the button to adjust the color as desired.
E-8 TROUBLESHOOTING If your monitor fails to operate functionally, it may be possible to correct the problem by making simple checks as follows: Problem Blank screen (*NOTE) Check & Adjust · · · Monitor power switch, power cord, signal cable, or connector PC power switch Brightness & contrast controls Display position off-center · Display too small or too large · Vertical & horizontal size controls Display too bright or too dim · Brightness & contrast controls SERVICING Refer all servicing to q
English E-9 TECHNICAL SPECIFICATIONS Screen Size 17" visual diagonal Viewable screen size 15.98" Anti-Glare Coating** Power Input Voltage/ Frequency Dot Pitch 0.27mm Current Rating 1.5 A Power Consumption 75 W (MAX.) Display Area Default Full Scan (H x W) 230 x 306 (mm), typical 245 x 327 (mm), depends on signal timing 100 to 240V AC 50 - 60 Hz Display Colors Infinite Dimension (W x H x D) 404 x 407.4 x 422.6 mm (approximate) Max. Resolution 1600 Dots x 1200 Lines Weight 14.
E-10 PRESET MODES Mode Resolution (H x V) H. Freq. (KHz) V. Freq. (Hz) Mode Resolution (H x V) H. Freq. (KHz) V. Freq. (Hz) 1 720 x 400 31.4 70 8 1024 x 768 60 75 2 640 x 480 31.4 60 9 1280 x 1024 64.3 60 3 800 x 600 37.9 60 10 1024 x 768 68.6 85 4 640 x 480 43.3 85 11 1600 x 1200 75 60 5 800 x 600 46.8 75 12 1280 x 1024 80 75 6 1024 x 768 48.3 60 13 1280 x 960 85.9 85 7 800 x 600 53.
English E-1 FEDERAL C OMMUNICATIONS COMMISSION (FCC) WARNING nstruction to Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
E-2 PACKING CONTENTS The package contains: • CRT monitor • AC power cord • User manual INTRODUCTION This microprocessor-based, digital control 17” color monitor is a high performance and easy to use product. UNPACKING PROCEDURE 1 2 It employs the latest on-screen-menu technology. The microprocessor capability offers 13 most commonly used VESA timing modes preset in the factory, and 6 modes for user to adjust to the special timings that user might have.
English E-3 INSTALL THE MONITOR • • • To connect the tilt/swivel base to the monitor, align hooks with the sockets on bottom side of the monitor, and gently push the base towards the front of the monitor. The 15-pin D-shell signal connector on the signal cable will connect easily to the video adapter output on your personal computer. Lock both screws on the connector to ensure a firm connection. Turn the PC power switch ON. Then turn the monitor power switch ON, by pressing the switch inward.
E-4 USER CONTROLS AND INDICATORS a b c a. Displays menu & exits menu b. Scrolls through menu to choose an icon for adjustment / Adjusts level of selected icon c. Confirms menu selection 1 2 1. Power LED 2.
English E-5 USING THE ON-SCREEN DISPLAY 1) Menu screen-press the 1 button to display the menu below and exit menus Select mark Press the button to move the selection mark to the desired location. Adjustment icons 1: CONTRAST The item presently being adjusted is shown. When the 2 button is pressed. The selected adjustment screen appears. :2 CONTRAST V.SIZE ROTATION DEGAUSS BRIGHTNESS V.POSITION COLOR RECALL 1: H.SIZE V.PINCUSHION LANGUAGE H.MOIRE H.POSITION TRAPEZOID DISP.FREQ V.
E-6 INDIVIDUAL ADJUSTMENT CONTRAST adjustment Adjust the screen contrast to match your personal perference. Press the button to decrease contrast and press the button to increase it. Direct operation: You can access the CONTRAST adjustment screen by pressing the or before entering the menu screen. Press the 2key toggles between CONTRAST and BRIGHTNESS. BRIGHTNESS adjustment Adjusts the brightness to get the desired background level.
English E-7 COLOR selection The white of the image can be adjusted. 1) Use the button to select: (1)9300 OK, (2)6500 OK or (3)User color. 2) If the (3):the user’s color is selected, “2” appears in the lower right of the On-Screen Menu. Press the 2 button to display the USER COLOR adjustment screen. USER COLOR The white of the video image can be adjusted to the user’s preferred color. 1) Use the 2 button to select R (red), G (green) or B (blue). 2) Use the button to adjust the color as desired.
E-8 TROUBLESHOOTING If your monitor fails to operate functionally, it may be possible to correct the problem by making simple checks as follows: Problem Blank screen (*NOTE) Check & Adjust · · · Monitor power switch, power cord, signal cable, or connector PC power switch Brightness & contrast controls Display position off-center · Display too small or too large · Vertical & horizontal size controls Display too bright or too dim · Brightness & contrast controls SERVICING Refer all servicing to q
English E-9 TECHNICAL SPECIFICATIONS Screen Size 17" visual diagonal Viewable screen size 15.98" Anti-Glare Coating** Power Input Voltage/ Frequency Dot Pitch 0.27mm Current Rating 1.5 A Power Consumption 75 W (MAX.) Display Area Default Full Scan (H x W) 230 x 306 (mm), typical 245 x 327 (mm), depends on signal timing 100 to 240V AC 50 - 60 Hz Display Colors Infinite Dimension (W x H x D) 404 x 407.4 x 422.6 mm (approximate) Max. Resolution 1600 Dots x 1200 Lines Weight 14.
E-10 PRESET MODES Mode Resolution (H x V) H. Freq. (KHz) V. Freq. (Hz) Mode Resolution (H x V) H. Freq. (KHz) V. Freq. (Hz) 1 720 x 400 31.4 70 8 1024 x 768 60 75 2 640 x 480 31.4 60 9 1280 x 1024 64.3 60 3 800 x 600 37.9 60 10 1024 x 768 68.6 85 4 640 x 480 43.3 85 11 1600 x 1200 75 60 5 800 x 600 46.8 75 12 1280 x 1024 80 75 6 1024 x 768 48.3 60 13 1280 x 960 85.9 85 7 800 x 600 53.