User's Manual

Installation Process
2-10 AcceleRAID 352 Installation Guide
3. Remove the AcceleRAID 352 controller from the anti-static bag as
shown in Figure 2-7. Always handle the controller by the edges and
wear a ground wrist strap.
Figure 2-7. Remove the controller from the Anti-static Bag
4. Plug (install) the controller firmly into any 32-bit or 64-bit PCI slot as
shown in Figure 2-8.
Figure 2-8. Plug the Controller into any 32-bit or 64-bit PCI Slot
Ground
Wrist Strap