User Guide

Chapter 4 - Installing Optional Components 4-17
To insure proper installation, remove all DIMMs
from their sockets before installing or removing the
CPU. See section 4.6.2 for instructions on
removing a DIMM.
2. Press the latches on both sides of the processor to release it from the retention
mechanism. You will hear a click sound once the latch is released.
3. Pull out and lift up the processor to detach it from the CPU connector.
Figure 4-16 Pressing the Latches and Detaching the CPU
4.7.2 Installing a Pentium II CPU
Observe the ESD precautions when installing or
removing a system component. See section
4.1.1.
Before you proceed, make sure that there is no processor installed in the CPU
connector.