Technical information

Chapter 2 33
Parameter Description Options
Virus Warning This feature allows you to enable the VIRUS
warning function for IDE Hard Disk boot sector
protection. If this function is enabled and there
is someone attempt to write data into this area,
BIOS will show a warning message on screen
and the alarm will beep.
Enabled
Disabled
Silent Boot This features allows you to enable or disable if
the screen logo to display or no during POST
Enabled
Disabled
Configuration Table This feature allows you to enable or disable if
showing summary screen or not
Enabled
Disabled
Quick Power On Self Test This feature allows the system to skip certain
tests while booting. When this function is
enabled, it will decrease the time needed to
boot the system, which means to quick power
on self test function
Enabled
Disabled
Boot Up NumLock Status This item defines if the keyboard Num Lock key
is active when your system is started.
On
APIC Mode This item allows you to enable or disable the
APIC (Advanced Programmable Interrupt
Controller) mode. APIC provides symmetric
multi-processing (SMP) for systems,allowing
support for up to 60 processors.
Enabled
Boot Device Priority Scroll to this item and press <Enter> to view the screen
Hard Disk Drives Scroll to this item and press <Enter> to view the screen
Removable Drives Scroll to this item and press <Enter> to view the screen
CD/DVD Drives Scroll to this item and press <Enter> to view the screen
Boot Other Device When enabled, the system searches all other
possible locations for an operating system if it
fails to find one in the devices specified under
the First, Second, and Third boot devices.
Enabled