Specifications

5.6 Display Area 6. ENVIRONMENTS
Display area : 338 x 270 mm
5.7 General performance
5.7.1 Maximum pixel clock
135 MHz
5.7.2 Maximum luminance
* Non-condensation
7. REGULATORY STANDARDS
7.1 Safety standards
This monitor applies to various safty & EMI
standards May refer to the logo label
5.7.3 Brightness variation 7.2 EMC standards
FCC part 15,subpart B , class-B
CE marking
8. OTHERS
TUV (Rheinland)
ISO13406-II pixel fault class 2
TCO99
9. P0WER CORD
Northern Hemisphere Version : UL / CSA
approved power cord.
European : VDE approved power cord.
5.7.4 Contrast ratio (CR)
10. SIGNAL CABLE
Signal cable with Mini D-Sub 15P connectors at
both ends.
Length : 1.5 meter.
11. RELIABILITY
11.1 MTBF for completed unit without LCD
> 30,000 hours (demonstrated MTBF)
11.2 MTBF for LCD
The brightness is still more than 50% of the
original brightness after 25,000 hours (min.)
Operation Storage and
Shipment
Tempera
ture
0 ~ 40 C -20 ~ +60 C
Humidit 5 ~ 90 %
*
5 ~ 90 % *
Altitude 3000m 12000m
Value 250 cd / m2 at center of the
display area ,Specified by
6500K + 8 MPCD
Conditions Display image : Full white
Brightness : Maximum
Contrast : Maximum
Value 75 % Variation = C / A x 100
Conditions Display image: Full white
Brightness : Maximum
Contrast : Maximum
A: Luminance at center
position
C: Luminance at position of
lowest brightness
Value CR= B / A
Conditions Contrast : Maximum
B: Full white pattern
Brightness : min
A: Full black pattern
Brightness : max
L7EA (AL708) 3-3