Desktop PC User's Guide

29
Installing and removing storage devices
The system supports 3.5-inch and 5.25-inch internal storage devices.
The system comes pre-installed with a floppy drive and a DVD or a
combo drive. The empty 5.25-inch half-height bays allow you to install
additional drives such as another DVD drive or a tape drive.
To remove a 5.25-inch storage device:
1 Observe the ESD precautions and pre-installation procedures
described on page 25.
2 Disconnect the IDE power (1) and data (2) cables from the old
drive.
3 Push the lever in the direction of the unlock icon (3), then pull
the drive out of the chassis (4).
4 Observe the post-installation instructions described on page 26.