Desktop PC User's Guide

BPL5M hot-swap cage components

The BPL5M hot-swap cage content box includes the following

components:

• One hot-swap cage (with backplane board attached)

• Five hard drive trays

• One mainboard connector cable

• Two hard drive fault LED connector cables

Installing the BPL5M hot-swap cage

1 Remove the housing panels. Refer to page 51 for more detailed

instructions.

2 Insert the BPL5M hot-swap cage into the housing and secure it

with the two screws provided. The hot-swap cage will occupy

three 5.25-inch drive bays.

3 Attach the power cable, the HDD fault LED cable, and the

mainboard connector cable to the backplane board and attach the

other end of the connector cable to the mainboard.

AA G610.book Page 61 Monday, October 22, 2001 9:46 AM