Desktop PC User's Guide

Installing expansion cards

The onboard expansion slots supports PCI (Peripheral Component

Interconnect) cards.

To install an expansion card:

1 Remove the housing panels. Refer to page 51 for more detailed

instructions.

2 Locate an empty expansion slot on the mainboard.

3 Remove the metal bracket opposite the selected empty expansion

slot by removing the screw that holds the bracket to the housing

then pulling out the bracket.

4 Remove the expansion card from its protective packaging.

5 Align the card in the empty bracket. Make sure that the card is

properly seated.

AA G610.book Page 75 Monday, October 22, 2001 9:46 AM