Server User's Guide

Appendix B Rack installation guide
108
6 Attach the two side handles to the server using four hex head
screws for each handle.
7 Set the server aside.
8 Attach the rack brackets to the mounting rails.
a Align the rack brackets to the mounting rail until the six screw
holes become visible.
b Secure the rack bracket to the mounting rail using M4 x L8
screws. Tighten the screws loose enough to allow length
adjustment when installing the mounting rails to the rack.
AA G701 - EN.book Page 108 Tuesday, February 25, 2003 5:19 PM