System information

13
Altos R380 F2 FAQ (Frequently Asked Questions)
Since the BMC will continue to operate even though the system is powered off. So, please reboot the system
so that the BMC is reset to reload the BMC firmware or FRUSDR.
11. Should I update the BMC, FRU and SDR when I add/remove CPU or memory on Altos R380 F2?
ANSWER:
ANSWER:ANSWER:
ANSWER: Yes, you need to re-update the SDR when add/remove CPU and PSU.
12. Should I change any jumper before I update the firmware of BMC or FRUSDR?
ANSWER:
ANSWER:ANSWER:
ANSWER: No.
13. What’s the default username & password of BMC of Altos R380 F2?
ANSWER:
ANSWER:ANSWER:
ANSWER:
Username: root
Password: superuser
14. How do I enable the failover function for BMC connection?
ANSWER:
ANSWER: ANSWER:
ANSWER: Please enter connect to Smart Console and select Configuration
ConfigurationConfiguration
Configuration -> IPv4Network
IPv4NetworkIPv4Network
IPv4Network or IPv6 Netw
IPv6 NetwIPv6 Netw
IPv6 Netwo
oo
ork
rkrk
rk.
You will see the Enable LAN Failover available.
15. How do I enable/disable SOL (Serial Over LAN) function of BMC?
ANSWER:
ANSWER:ANSWER:
ANSWER: Please enter BIOS Setup during POST.
a. Select Server Management
b. Select Console Redirection and Change the setting form Disabled to Serial Port A.
c. Please make sure the Console Redirection option is enabled with default setting.
Flow Control [None]
Baud Rate [115.2k]
Terminal Type [VT100]
Legacy OS Redirection [Disabled]
Terminal resolution [80x24]
Legacy OS Redirection Resolution [80x25]
16. What is IPMITOOL?
ANSWER:
ANSWER:ANSWER:
ANSWER: The ipmitool program provides a simple command-line interface to BMC. It features the ability to