System information

32
Altos R380 F2 FAQ (Frequently Asked Questions)
13. Onboard Gigabit
1. What’s the onboard Gigabit of Altos R380 F2?
ANSWER:
ANSWER:ANSWER:
ANSWER: Intel I350 quad port Gigabit Ethernet controller.
More information of Intel I350 Ethernet controller can be found at:
http://ark.intel.com/products/52966/Intel-Ethernet-Controller-I350-AM4
2. What features can Altos R380 F2 onboard Gigabit Support?
ANSWER:
ANSWER: ANSWER:
ANSWER: Please refer to the table below.
Features
FeaturesFeatures
Features Onboard Gigabit
Onboard GigabitOnboard Gigabit
Onboard Gigabit NOTE
NOTENOTE
NOTE
# of ports 4 1
Network Teaming Yes
WOL (Wake On LAN) Yes
PXE (Pre-boot eXecution
Environment)
Yes
TOE (TCP Offload Engine) n/a
Jumbo Frame 9.5 KB
iSCSI Yes 2
iSCSI Boot Yes 2
NOTE 1. All ports of onboard Gigabit are connected to CPU1.
NOTE 2. Please refer to iSCSI section for more detail.
3. Can Altos R380 F2 support network teaming, such as AFT (Adapter Fault Tolerance) and ALB (Adaptive Load
Balance) with onboard Gigabit?
ANSWER:
ANSWER:ANSWER:
ANSWER: Yes, you can do the network teaming with onboard gigabit by installing PROSet Utility which is
included in Smart Setup DVD.
More information can be found at:
http://www.intel.com/support/network/sb/cs-009747.htm
4. Is there any BIOS option to enable/disable Altos R380 F2 onboard gigabit?
ANSWER:
ANSWER:ANSWER:
ANSWER: Yes.
Please enter BIOS Setup during POST.
a. Please select Advanced.
b. Please select PCI Configuration.
c. Please select NIC Configuration
d. You would see below information:
Onboard NIC1 Controller [Enabled]
Onboard NIC1 Port1 [Enabled]
Onboard NIC1 Port2 [Enabled]
Onboard NIC1 Port1 PXE [Enabled]
Onboard NIC1 Port2 PXE [Enabled]