Manualshelf

System information

ManualsBrandsAcer ManualsComputer equipmentAltos R380 F2
51525354555657585960
55
Altos R380 F2 FAQ (Frequently Asked Questions)
RAID controller without SGPIO support.
With HDD Access LED driven by PIN 11 (P11) of SAS/SATA HDD, the HDD Access LED would work independent
of SAS/SATA RAID controller.
However, the HDD failure and RAID rebuilt LED are still driven by SGPIO.
7. Is a SAF-TE (I2C) cable required for SAS back-plane LED control?
ANSWER:
ANSWER:ANSWER:
ANSWER: No. Altos R380 F2 SAS backplane does not support SAF-TE (SCSI Access Fault Tolerance Enclosure).
The LED control of back-plane is through SGPIO.
8. Is there any SGPIO cable that I should connect if the RAID controller supports SGPIO?
ANSWER:
ANSWER: ANSWER:
ANSWER: The signal of SGPIO is included in the SAS/SATA cables. There is no additional SGPIO cable required.