System information

Altos R380 F2 FAQ (Frequently Asked Questions)

5. How do I know the version of BIOS and firmware of MegaRAID?

ANSWER:

ANSWER:ANSWER:

ANSWER: You would see below MegaRAID 9240-4i related information during POST:

LSI MegaRAID SAS-MFI BIOS

Version 4.24.00 (Build June 03, 2010)

HA –0 (Bus 2 Dev 0) LSI MegaRAID SAS MR9240-4i

FW package: 20.10.1-0037

Battery Status: Not present

PCU SLOT ID LUN VENDOR PRODUCT REVSION CAPACITY

-------- -- --- ------- ------- ------- --------

1 LSI LSI MegaRAID SAS MR9240-4i 0MB

0 Virtual Drive(s) Found on the host adapter.

0 Virtual Drive(s) handled by BIOS

Press <Ctrl><H> for WebBIOS or press <Ctrl><Y> for Preboot CLI

In this example, the BIOS version is 4.24.00, and the firmware package version is 20.10.1-0037.

NOTE. This POST information of MegaRAID would be available for both UEFI mode and legacy mode on Altos

R380 F2.

6. How do I configure MegaRAID in legacy mode?

ANS

ANSANS