System information

71
Altos R380 F2 FAQ (Frequently Asked Questions)
5. How do I know the version of BIOS and firmware of the integrated RAID Module RMS25CB040/RMS25CB080?
ANSWER:
ANSWER:ANSWER:
ANSWER: You would see below integrated RAID Module RMS25CB040/RMS25CB080 related information
during POST:
RAID Controller BIOS Version 5.30.00 (Build November 18, 2011)
HA -0 (Bus 131 Dev 0) Intel(R) Integrated RAID Module RMS25CB040
FW package: 23.7.0-0037
Battery Status: Not present
PCU SLOT ID LUN VENDOR PRODUCT REVSION CAPACITY
-------- -- --- ------- ------- ------- --------
6 INTEL Intel(R) Integrated RAID 3.190.35-1786 1024MB
0 Virtual Drive(s) found on the host adapter.
0 Virtual Drive(s) handled by BIOS
Press <Ctrl><Y> for Preboot CLI
>>>>>> Press <Ctrl><G> to enter the RAID BIOS Console <<<<<<<
In this example, the BIOS version is 5.30.00, and the firmware package version is 23.7.0-0037.
NOTE. This POST information of the integrated RAID Module RMS25CB040/RMS25CB080 would be available
for both UEFI mode and legacy mode on Altos R380 F2.
6. How do I configure the integrated RAID Module RMS25CB040/RMS25CB080 in legacy mode?
ANSWER:
ANSWER:ANSWER:
ANSWER: Please refer to Appendix C of Altos R380 F2 ICG (Installation Configuration Guide).
7. How do I configure the integrated RAID Module RMS25CB040/RMS25CB080 in EFI mode?
ANSWER:
ANSWER:ANSWER:
ANSWER: Please refer to Appendix C of Altos R380 F2 ICG (Installation Configuration Guide).