User Manual

105
10 Press Esc to return to the Management menu.
11 Select Yes to exit the configuration utility.
12 Press Ctrl+Alt+Del to reboot the system.
Proceed to the installation of the operating system. Refer to the
user documentation that came with your OS for related
instructions.
To initialize a RAID 1 volume
1 On the Management menu, select Initialize.
All logical drives will be listed.
2 Press the space bar to select the drive to initialize. The selected
drive will be highlighted in yellow.
3 After selecting the drives, press F10 and select Yes to initialize the
new logical drives.
4 When initialization is completed, press Esc.
5 Press Esc to return to the Management
menu.
6 Select Yes to exit the configuration utility.
7 Press Ctrl+Alt+Del to reboot the system.
Proceed to the installation of the operating system. Refer to the
user documentation that came with your OS for related
instructions.
To assign a hot spare disk:
1 On the Management menu, select Objects.
2 Select Physical Drive.
All drives will be listed.
3 Select the drive marked Ready
, then press Enter.
4 Select Make Hot Spare, then press Enter.
5 Select Yes.
The assigned hot spare disk is marked as HOTSP
.
6 Press Esc to return to the Management
menu.
7 Select Yes to exit the configuration utility.
8 Press Ctrl+Alt+Del to reboot the system.
Proceed to the installation of the OS. Refer to the user
documentation that came with your OS for related instructions.