Altos User's Guide
Table Of Contents
- Notices
- Important safety instructions
- 1 System tour
- 2 System setup
- 3 System upgrade
- 4 BIOS setup
- 5 Troubleshooting
- Appendix A: Acer Altos R910 rack installation guide
- Appendix B: Memory configuration options
- Appendix C: Integrated SCSI hardware RAID configuration
- Index
149
3 Install the mounting rails to the rack posts.
(1) Determine the vertical position in the rack. Refer to “Vertical
mounting hole pattern” on page 146 for more information.
(2) Align and insert the mounting rail into the rack posts’
mounting holes (A).
(3) Make certain the proper mounting holes on the rack post are
selected.
(4) Use two metal screws to secure the front and rear mounting
rail to the rack (B).
(5) Do the same thing to the other mounting rail.