Altos User's Guide
Table Of Contents
- Notices
- Important safety instructions
- 1 System tour
- 2 System setup
- 3 System upgrade
- 4 BIOS setup
- 5 Troubleshooting
- Appendix A: Acer Altos R910 rack installation guide
- Appendix B: Memory configuration options
- Appendix C: Integrated SCSI hardware RAID configuration
- Index
37
4 Lift the top cover away from the server and put it aside for
reinstallation later (B).
Installing the top cover
1 Observe the ESD precautions and pre-installation instructions
described on page 33.
2 Place the top cover on the chassis so that the tabs on the cover
align with the slots on the chassis (A).
3 Slide the top cover toward the front of the chassis until it is fully
closed.
4 Tighten the captive screws on the faceplate of the chassis (B).