Altos User's Guide
Table Of Contents
- Notices
- Important safety instructions
- 1 System tour
- 2 System setup
- 3 System upgrade
- 4 BIOS setup
- 5 Troubleshooting
- Appendix A: Acer Altos R910 rack installation guide
- Appendix B: Memory configuration options
- Appendix C: Integrated SCSI hardware RAID configuration
- Index
3 System upgrade
40
Removing the center brace
You will need to remove the center brace to remove and install an
optional processor core VRM.
To remove the center brace
1 Observe the ESD precautions and pre-installation instructions
described on page 33.
2 Slide the chassis at each side of the chassis to the unlock position
(A).
3 Lift the center brace from the chassis (B).