Altos User's Guide
Table Of Contents
- Notices
- Important safety instructions
- 1 System tour
- 2 System setup
- 3 System upgrade
- 4 BIOS setup
- 5 Troubleshooting
- Appendix A: Acer Altos R910 rack installation guide
- Appendix B: Memory configuration options
- Appendix C: Integrated SCSI hardware RAID configuration
- Index
3 System upgrade
42
Removing a memory board air baffle
You will need to remove the memory board air baffle to perform the
following procedures:
• Removing and installing a memory board
• Removing and installing a PCI card
To remove the memory board air baffle
1 Observe the ESD precautions and pre-installation instructions
described on page 33.
2 Insert your fingers into the two holes on the top of the memory
board air baffle, then push the tab (A).
3 Lift the memory board air baffle from the server (B).